tis mud season

It's been a wet spring - gorgeous, but wet.
The long list of "little" projects had to be delayed to do trail maintenance - mulch left over from planting and stepping stones grabbed from the collection of rock walls on the property. Probably went through 2 cubic yards of mulch to cover the wettest spots.

May, finishing the outhouse and the ladder.

I completed the outhouse with interior paneling and hung the sliding door. The door was a street find - a bit silly for an outhouse, but I couldn't resist! Added screen to the inside of the door. The paneling took much longer than I expected, but gives a nice finished look to the interior. The outhouse has a maple tree to one side and an ash on the other. The ash just blocks the sliding door from fully extending, but one can still get in the loo. A future plan may be to add a small sink in there – it’s a good idea, just have to find a small enough sink.

Sanded the ladder down to #180 grade paper and oiled with Watco Danish Oil – 2 coats, finished with #0000 steel wool. Amazing how quickly the wood had picked up stains from being unprotected. It now has a buttery tone. Since there is only one spot the ladder fits, I had to rearrange the cabin so that I had room for three ladders – the ladder to be sanded, sandwiched between another 16’ ladder and a step ladder on the other side. This way I could work on the ladder without using it at the same time!

Classic Spring weather!

April Showers

I rented a van to get all the stuff I have collected over the winter upstate, including 55 sheets of 1/8th’ luan sheets – 48” by 96”. For days before my arrival it rained, but on the day of unloading the sky cleared and Steve helped me hump it down to the cabin site. Thank you Steve! We also did some much needed trail repair, since we turned any trail we walked on into mud. Layers of mulch, followed by the largest, flattest rocks we could carry saved the trails.
The next week Larry got to come up and we powered out the interior. The reasons I went for 1/8th plywood were numerous: the cost, the weight (Steve and I had to carry it 1000 feet), small cabin means the thicker the walls are, the narrower the room gets, and ease of installation – I didn’t want to have to rent a generator to attach the ply to the frame. I did use, with much success, a staple gun that also shoots brads. With two of these and utility knives to cut the ply, Larry and began and finished the job in 2 days.

The chandelier that had been gifted by my good friend Tom - I have it on a pulley system to lower and light at night.

The second floor ceiling - decided to do the extra work and leave the rafters exposed.
Next up is the molding!

We also took the time to repair the second window – the sight of the fields, woods and sky are lovely. This is my TV!

We took many breaks to sit and enjoy the view.

The water is running in the creek!


By the end, we went back to Larry’s shop and chose a walnut slab to cut down to make into window sills.

future window sills!

April, come she will

Okay – who remembers that Simon & Garfunkel song! But April has come and gone,as well as warm weather and a lot of rain and mud. It has been a busy month and I want to catch up - what better time than mud season to build an outhouse, deliver sheets of material (thank you Steve and Vanessa!), and clad the interior with siding (thank you Larry!).

The cabin has survived nicely. The footings have cracked through frost heave, but the cabin itself is standing firm – everything is as level as when I first built the place (I think). I have a company that will dig deeper and better post holes for me, but I am still on the fence as to whether or not I will do it. If you have had any experience with this, I would love to hear your opinion.

First I decided to build the outhouse – this one closer to the cabin so guests don’t have to go as far as they did. Like the first one; this is a Moldering Privy with plans from the Appalachian Trail Conference. http://atfiles.org/files/pdf/atcsanitation.pdf .

The 6 by 6 laid in and tied together with rebar, hence the sledge hammer.

Screened in with both hardware cloth (AKA ¼ “ chicken wire) and window screen so no bugs, varmints, or snakes can enter.

Framed out with 2 by 3’s. We will see how long they last!

Covered with the extra T-111 plywood from the cabin.

Roofed over with ¾” flooring OSB and roofing paper, also left over from the cabin build.

Treads laid in. The interior and the door have yet to be installed.

I’m glad I built this before all the bushes bud out. I’m hopeful that as they do the surroundings will hide the outhouse more. For the first outhouse, I used a privy shelter.

This has been up year round for two winters and is standing up to the elements just fine. I am hoping that that the wooden structure will be more spacious and comfortable – it took a lot longer to build!